Ron Bailey2
New User
Ok so I have a d3 crawler with a 3204 engine.
Ran it low on fuel and can't get run right after bleeding the injectors.
It runs good for a few mins the starts running rough again. I've changed the fuel filter and been bleeding it and letting it idle for awhile. Still when I Rev it up and put it under a load it starts running rough again. Done this 100 times now with out success. I've read there is a screen on the inlet fuel line
Ran it low on fuel and can't get run right after bleeding the injectors.
It runs good for a few mins the starts running rough again. I've changed the fuel filter and been bleeding it and letting it idle for awhile. Still when I Rev it up and put it under a load it starts running rough again. Done this 100 times now with out success. I've read there is a screen on the inlet fuel line