HD6G injectors

Phillip C

New User
I have a allis chalmers HD6g track loader with the 344 buda motor. I had an injector tip break off and I'm having a hard time finding any parts for it. Just wondering if anyone out there might have some injectors.
 
(quoted from post at 08:14:12 04/22/17) I still have a complete engine with hole in block. where are you located?

I'm Located at Polo, Missouri. About an hour northwest of Kansas City.
 
Phil I am about straight north of you. 10 miles west of Winterset Iowa on hwy 92 then 6 miles south on Deer Run Ave. Winterset is on hwy 169.
 
I work 7-5.00 Tuesday thru Friday and 8-12:00 on Sat. Off Sunday afternoon and all day Monday. Will be off this weekend and next weekend. Will be working the next couple of weekends after that with my second job. Call me 515-462-4768.
 
These injectors are still in the motor. If we can load it you can have the whole motor. I know I have tried to pick it up with my skid loader and could not lift it. But it is in a metal shipping box. Might be able to take it out of the box, load the box and then set the motor in it. Skid loader is rated at 1800 lbs. . I do not know if they used more than 1 type of injector in the 344 motor. I do know some of the water pump belts and tightners were different. FYI. Tom
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top