Need a little troubleshooting. Bought a really good condition ha payloader. Has original 6v system. Don't really want to change that. Been around 6v for years.if there right they start fine.
On this it barely turns it over. Had the starter rebuilt and cleaned all surfaces for good ground. All cables are large and clean. I'm losing amps along the way.
Could I be losing amps through solenoid or starter button.
By the way new battery. Even when I jump start still slow turning over.
Thanks in advance
On this it barely turns it over. Had the starter rebuilt and cleaned all surfaces for good ground. All cables are large and clean. I'm losing amps along the way.
Could I be losing amps through solenoid or starter button.
By the way new battery. Even when I jump start still slow turning over.
Thanks in advance