CASE W 14 LOADER LOST HYDRAULICS

lenray

Well-known Member
Hello fellas--Down a few lines I had asked a question about the Brakes on this loader. I hooked up the air pump--new belt--and was able to build some air pressure, but there were leaks in the system...
Just as I got the air pressure building I completely lost all of the hydraulics to the front boom and bucket. Still have power steering. Not sure if this is related , but seems odd that it would happen the same day. Unhooked the air motor. Any chance I blew some dirt into something that has shut down the hydraulics.
I have the service manual , but can't figure out the problem.
Would really appreciate any help--thank you len
 
Hello CASE NUTTY-----Yeah I had that hose off and forgot to reinstall---thank you--------------------Do you know if other hydraulics can be added to these loaders---so that I could run a two way hyd. cylinder. It is a CASE W 14
 
I have added a three spool valve to a customers W20B,, and yes they sure had three valve machines,, best bet may be a salvage yard,, the guy I did one for found NOS parts from some military surplus place, may be worth looking there as well, I would also bet you could install a electric valve diverter valve as well
cnt
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top