thomaskd44
Member
Well, I pulled the piston in number 4 cylinder -ugh. The top piston groove was chewed well, with bits of ring imbedded in the top of course. However, the cylinder wall -sleeve- is in excellent shape -not a scratch -puzzle???? Anyway, after pulling the piston I was going to install another piston from a TD 9. That piston would not fit into the 4th cylinder. I measured the piston across the top- and it measured 4 and 7/16, okay. I measured the piston I had removed, and it measured 4 and 3/16 problem. What the --- do I do now? Does anyone know where I can pick up a piston -five ring, TD 9 with the measurement of 4 and 3/16??
Why would there be a narrower sleeve?? And if someone put a narrower sleeve in, why, doesn't make sense. Perhaps some one here has a sound explanation, and where I may purchase a piston with that measyoo.
thanx in advance
Love my TD 9 - Td 9
Why would there be a narrower sleeve?? And if someone put a narrower sleeve in, why, doesn't make sense. Perhaps some one here has a sound explanation, and where I may purchase a piston with that measyoo.
thanx in advance
Love my TD 9 - Td 9