Intl T6 Crawler

ShepFL

Well-known Member
Just acquired a complete running T6 crawler with
spare engine. Anyone got pics of way to rig up a
simple blade to use this rig for brush clearing.

If I cannot do this inexpensively I will be selling
the rig and use my Oliver 1650 loader.

Email is open.
Thanks!
 
I suppose there are plenty guys that have cobbled up a blade,if its just a bare tractor you have has it hydraulics and control valve etc that can be utilized to work the blade,go over to Red Power the International site at the link below.
AJ
http://www.redpowermagazine.com

mvphoto13813.jpg

[/img]
 
Neighbor had a TD6 with a small lightweight dozer that worked good for snow because he could get up on top of the snow drifts and clean off the top so that he could cut through the bottom.

Heavier crawlers and dozers ran the risk of breaking down through the drifts and getting stuck.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top