John deere 1010 dozer

Anonymous-0 · Jun 29, 2014

Can someone tell me where to get the coupler that connects the hyd pump to the crankshalf (front)

Bret4207 · Jun 29, 2014

Mother Deere probably $ell$ it. Otherwise hit up Lavoy at www.jdcrawlers.com

JDemaris · Jun 29, 2014

The front coupler was proprietary from Deere (that bolts to the front crank pulley). All depends on which size pump you have. 1010s usually have a pump with splines that are 7/8" OD X 13. Ford and Case use the same. You can make a new coupler from Ford parts. The pump on the Ford, Case, Deere, etc. use a Webster or Cessna with a 2 bolt SAE B mount. Pretty common. I'm talking about a 1010 with a one piece drive before serial # 219,00. If you have a later 1010 with the pump disconnect - things are a little different.

Anonymous-0 · Jun 29, 2014

It is 4 bolts with splines Thanks

JDemaris · Jun 29, 2014

You can adapt a Ford type coupler to work. I did it on my 1960 1010 crawler-loader years ago. Yous spines should be 7/8" X 13 just like these Ford couplers have. You might have to make an adapter plate to make it fit your crawler.

John deere 1010 dozer

Anonymous-0

Well-known Member

Bret4207

Well-known Member

JDemaris

Well-known Member

Anonymous-0

Well-known Member

JDemaris

Well-known Member

Similar threads