James Chapman
New User
Hey guys,
I have a John Deere 350 (no letter beyond the 350)
It has the 6300 dozer blade option. I just bought
it a week ago. I noticed it had a leak under it
but I did not realize how bad. I got on it and
used it for a couple hours the hydraulic fluid was
in the sight glass. I stop it ate some lunch
noticed the fluid was low put some in, got on the
machine and I can not move the blade in any
direction. It tries but can't move more than a 1/2
inch in any direction. The pump is not squeling, I
have tried to bleed the line(s) at the valve body,
before and after, but all I am getting is fluid
and lots of it! The pump is pumping. I just don't
know where the air could be trapped if that is
the problem. Please help guys!!!
I have a John Deere 350 (no letter beyond the 350)
It has the 6300 dozer blade option. I just bought
it a week ago. I noticed it had a leak under it
but I did not realize how bad. I got on it and
used it for a couple hours the hydraulic fluid was
in the sight glass. I stop it ate some lunch
noticed the fluid was low put some in, got on the
machine and I can not move the blade in any
direction. It tries but can't move more than a 1/2
inch in any direction. The pump is not squeling, I
have tried to bleed the line(s) at the valve body,
before and after, but all I am getting is fluid
and lots of it! The pump is pumping. I just don't
know where the air could be trapped if that is
the problem. Please help guys!!!