Author	[Modern View]
biggerred 01-04-2013 17:09:44 74.177.51.193 Report to Moderator	I bought this mast several years ago, and had the info written down about the machine it came from, but it"s long gone. I"ve done a 3pt conversion on it to use with my tractors. Problem now is, one of the tilt cylinders is leaking pretty good out the shaft, and I need a kit for it. If anyone can tell by the pics what brand it is (I was thinking it was in the 6000lb range) or model I"d be mighty thankful!! [Reply]   [No Email]
charden 01-13-2013 15:15:19 97.125.243.128 Report to Moderator	Re: Any forklift guys out there???? (pictures) in reply to biggerred, 01-04-2013 17:09:44   It's an Allis Chalmers Mast. I worked for an AC dealer for 7 years. Part# for the tilt cyl. kit is 4906332. Part # for the lift cyl. packings is 4906100. Any forklift dealer should be able to take these numbers and get the kits for you aftermarket.   [Reply]  [No Email]
biggerred 01-13-2013 19:29:36 74.177.51.193 Report to Moderator	Re: Any forklift guys out there???? (pictures) in reply to charden, 01-13-2013 15:15:19   Thank You!!   [Reply]  [No Email]
Bill Lisbon 01-05-2013 18:33:43 69.89.163.167 Report to Moderator	Re: Any forklift guys out there???? (pictures) in reply to biggerred, 01-04-2013 17:09:44   Look up Hercules hydraulics, they have kits and all kinds of hydraulic seals.   [Reply]  [No Email]
NCWayne 01-04-2013 20:11:21 69.40.232.132 Report to Moderator	Re: Any forklift guys out there???? (pictures) in reply to biggerred, 01-04-2013 17:09:44   Since it's an older mast finding a true kit will probably not be possible. If it is it would come through a dealership and cost twice, or three times what the parts are worth. That said if it were mine, or belonged to a customer of mine, I'd tear it down and take the seals to a hydraulic supply house and let them match the parts up. This shouldn't be that hard for them to do and will more than likely save you alot of money over getting a 'kit'.   [Reply]  [No Email]
curtis larson 01-04-2013 17:33:06 74.33.7.162 Report to Moderator	Re: Any forklift guys out there???? (pictures) in reply to biggerred, 01-04-2013 17:09:44   Looks like a Clark cy 400. I do not think it is a 6000lb lift   [Reply]  [No Email]