Hello, working on a 1949 DC3 with an adjustable wide front axle. My issue is that the tractor will turn way shorter to the right and barely turn to the left. The steering arm on the tractor is 73 inches overall length and I have a couple parts tractors that have the same length steering link so I think that it is correct but could someone verify that for me? Any suggestions on centering the steering? Front pedestal arm is keyed to the shaft so I don't think I can adjust there, but I have not torn it apart yet. With the arm pulled from the steering gearbox the front axles has free movement but it is the stop on the gearbox arm that hits stopping motion to the left. Thanks for any suggestions, Mike.