Need Case 830 hydraulic pressure relief cap

Jruiz8514 · Nov 30, 2017

I have a case 831 case o matic and am looking for a pressure relief cap. My top link went too low and broke it off. It is above the two hydraulic 3pt levers and between the two housing bolts. Inside of the cap are two springs one within the other, the threaded whole it goes into is About 3/4"

Anyone know where i could find or have one for sale ?

Could i possibly use some type of pipe with a cap instead.

Jruiz8514 · Nov 30, 2017

Picture below

RBnWA · Nov 30, 2017

jruiz8514 I should have one. I can check in the morning. If I do you pay shipping and it s your s. E-mail is on classic view. Richard

Jruiz8514 · Nov 30, 2017

Picture

rgorange · Dec 1, 2017

Another example of what a fine group of people we have on this site

RBnWA · Dec 1, 2017

Thank you rgorange. The y/t mag is a great site. I am a case man. RB

Jruiz8514 · Dec 1, 2017

If you could shoot me an email on the details would be great

[email protected]

karl f · Dec 2, 2017

(quoted from post at 21:03:40 11/30/17) Picture

Check out the casting logos in this photo. What do you see next to old Abe? Is the merger foretold in these glyphs? I saw this logo combo on a case tractor hydraulic valve in a junk yard last year too. Too bad Abe is upside down.
-Karl f

Jruiz8514 · Dec 4, 2017

Tried 1" pipe which is just a bit too wide to thread on without stripping. Below is a picture if anyone has an idea or has one for sale. The ones RKNB had were different

Need Case 830 hydraulic pressure relief cap

Jruiz8514

New User

Jruiz8514

New User

RBnWA

Well-known Member

Jruiz8514

New User

rgorange

Member

RBnWA

Well-known Member

Jruiz8514

New User

karl f

Well-known Member

Jruiz8514

New User

Similar threads