(800) 853-2651
SHOP NOW

800 Dozer getting moved

1

111

Member
Just moving the 800 from the building it was in to another building with the rest of my tractors.
Ben
a167262.jpg

a167263.jpg

a167264.jpg

a167265.jpg

a167266.jpg
 
800 and 100/1010 models were the first with counter rotating tracks, like Dan said a Nice looking unit,, I bet it was a real Load for that trailer too
cnt
 
Nice dozer, I have a trailer just like that and did not know if I could haul my 450, looks like I will give it a try. Rod.
 
Rod your 450 with loader is 13,000 lbs
the 800 should be 11,000-12,000 lbs range, my book shows 11,200 but I do not think that includes the dozer, the 450 weight is one with a loader and counter weight std bucket
cnt
 
I think that's right up there in the "famous last words" catagory, Kinda like "Hey! watch this.........." Don't forget the 90# in the tires..... (and don't ask how I know all about this stuff)
 
That would be real borderline for my trailer with 7000# axles. Figured I could hook the trailer to the 970 and the when I load the 450 I could put a little extra weight on the hitch of the tractor. I need to move it 14 mi. Rod.
 
Good to know you're just moving it around your place, not on the highway with that truck or trailer. Nice looking tractor, by the way.
 
Yes, Rod, just think, a lot of guys think cause you have 2 7000lb axles that you can haul 14k! And that's dead wrong, you have to take the weight of the trailer off the 14k, and that is roughly what you can haul. Personally, I think the trailer will fail before the axles
 
I have previously haul the 580C out to the farm and I would imagine its weight somewhat the same. But I got scolded for doing so and now I just drive it out. I might see if a can borrow a trailer more suitable also, Rod.
 
You must log in or register to reply here.

Similar threads

olgentdc
Starter 800-730 diesel interchange ?
Replies
6
Views
411
chuck machinist
chuck machinist
C
Steel Wheels & Concrete Floors
Replies
17
Views
1K
Fixingfarmer
Fixingfarmer
W
Case disc?
Replies
6
Views
643
Wrangler1973
W
C
800 Sleeve Protrusion
Replies
2
Views
244
chuck machinist
chuck machinist
H
A Case Thanksgiving
Replies
5
Views
409
ILB
I
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top