Lifting a Lely Roterra with my 1270.With the raise stop all the way back it picks it right up.Problem is the pto is such an angle I can only raise it a couple inchs off the ground, which isnt much movement at the lever.It raises really slow like this. Sometimes I get out and walk around the tractor, and all at once the hitch raises. Had the cover off the bottom linkage box, and didn't see anything wrong. Any ideas?
- Thread starter gpurrs
- Start date
casecollectorsc
Well-known Member
- Location
- E central SD.
1270 Case?? Take your question to the Case forum..lots of smart guys there.
Your DOM or 3 pt valve needs a good cleaning. This can sometimes be done by not removing the valve but I find that to be a real pain as oil will be dripping down on you.
Removing the valve requires draining the trans oil most of the time and is a bit more work but a good thorough job can be done that way. The main spool needs to be un
screwed from the linkage box for valve removal. Do not mess with the lowering screw adjustment and a CASE manual will be very useful if you are unfamiliar with these
valves. Rod.
Removing the valve requires draining the trans oil most of the time and is a bit more work but a good thorough job can be done that way. The main spool needs to be un
screwed from the linkage box for valve removal. Do not mess with the lowering screw adjustment and a CASE manual will be very useful if you are unfamiliar with these
valves. Rod.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy