DC engine question

Jim McVay · Mar 12, 2017

I'm trying to get the most from a DC. Got 4 1/16 dome pistons with gas 5505A head. Do I dare put an LP 6128A head on it or just cut the gas head .060?

mEl · Mar 12, 2017

Jim, I have taken .100 off with no problem, you may have to run a hotter fuel. How much hp are you after?

Jim McVay · Mar 12, 2017

mEl · Mar 12, 2017

Jim,
that is gonna be tough to get without some work, I have one in the works right now but it is not close to running, I did some extras to this one to get the compression up but I was working with a bare block to start with. Give me a call at 570 279 1021 and we will talk.

Mel

D standard · Mar 15, 2017

So, facing off 0.100 from a "fresh" gas head is reliable? I am looking to just cheat in farm stock, this sounds like a good way to gain some compression.

DC engine question

Jim McVay

Member

mEl

Well-known Member

Jim McVay

Member

mEl

Well-known Member

D standard

Member

Similar threads