Need a expert

fbhall69

New User
can anyone give me the year , model # of this Case ...this is the only picture I have of it ......Thank you !!!
46247.jpg
 
I looked at the fenders , and they look more like the fenders you would get on a
530. Also appears to have a three section hood , the smaller 430 tractor had
clam shell fenders , and a one pieces hood. Hard to be real sure about much more
because of the angel of the picture . The 530 and 630 would have both shared the
same features.
 
300B or 400B those models were made in 58 and 59. I looked at this picture earlier today and when i went back and looked at it again tonight
aI thought where did that deer come from.
 
Bruce, I am also not an expert but it has to be a 00B series because of the chrome "CASE" emblem on the side and exhaust out the left side. It has to be a 300B or 400B.
 
(quoted from post at 19:26:55 03/02/17) Bruce, I am also not an expert but it has to be a 00B series because of the chrome "CASE" emblem on the side and exhaust out the left side. It has to be a 300B or 400B.



thank you guys for the info ....the tractor is holding up the deer ...the tractor was my neighbors and he wants to try to find it , but we wetre kids back then and dident know what it is ...
 
Front axle pivot indicates 300b or 400b. The height of the grille screens would indicate 400b. They are taller than the 300b. On the 300b the screens and cap are almost square as far as height and width. This appears to be considerable taller that it is wide. I know sometimes the picture can be somewhat distorted but usually not that much. Lee
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top