Help in finding a sprocket for Case 200 square baler

Nicholaus Sowder · Feb 20, 2017

Help in finding a sprocket for Case 200 square baler. The case part number is f95374. The sprocket is for the knotter drive. The sprocket has
nine teeth. Thank you

DKase · Feb 20, 2017

The easiest way to replace the sprocket is to buy a weld on sprocket and hub to fit your application and weld the 2 together. G+G is the most common brand in the upper midwest. If you have some special hub that is welded to another piece you have the option of cutting your sprocket off your hub and using that. Your 9 tooth sprocket will fit right into a 3 jaw chuck in a lathe.

Nicholaus Sowder · Feb 20, 2017

The sprocket is an idler sprocket on the side of the square baler. The chain drives the knotter drive. The idler sprocket is held on the square baler with a bolt that fits on a square slot, the bolt has a square head. It's like a t bolt, like you use on a milling machine.

casecollectorsc · Feb 20, 2017

That is easier yet. Like DKase replied, G+G has sprockets and also idlers. Any good bearing supply house should have or can get them. Some farm stores as Runnings or TSC carry them also.

VACLee · Feb 20, 2017

Even thought it is extended pitch chain a regular sprocket will work unless you are worried about originality. It would just have 2 teeth in each link. Lee

Help in finding a sprocket for Case 200 square baler

Nicholaus Sowder

Member

DKase

Well-known Member

Nicholaus Sowder

Member

casecollectorsc

Well-known Member

VACLee

Member

Similar threads