Adirondack case guy
Well-known Member
Finished the fab process o the front fender under the bumper/grill guard on the 830 today. Wish I had a "Chip Foose shop, and all the hard edges could have been rounded and softened with an English wheel, But I don't have that stuff.
All I need to do now is to add some of those bottle brush thingies that you see on semi-trailers over the wheels. Maybe Jon can get me some!! (Just kidding)
Next project is a nice set of steps in front of rear tires to get on the tractor. The 2 post canopy struts pretty much eliminated entry from the rear on this Eagle hitch 830.
When I bought the tractor it had an ugly Curtis hardtop weather break on it with no rear entry. The PO fabed a 70 series LH step onto it, which works, but I can build better. I do have a pair of front handrails for a CK in my stash for it.
Loren
All I need to do now is to add some of those bottle brush thingies that you see on semi-trailers over the wheels. Maybe Jon can get me some!! (Just kidding)
Next project is a nice set of steps in front of rear tires to get on the tractor. The 2 post canopy struts pretty much eliminated entry from the rear on this Eagle hitch 830.
When I bought the tractor it had an ugly Curtis hardtop weather break on it with no rear entry. The PO fabed a 70 series LH step onto it, which works, but I can build better. I do have a pair of front handrails for a CK in my stash for it.
Loren
