Model 212 Chopper ???

John Saeli · Jan 12, 2017

Got a customer needing a flat Belt for the blower on a 212 Chopper. I cannot find any belts listed in the parts books. None. Anyone have a part number for that belt? Much appreciated!!

casecollectorsc · Jan 12, 2017

This won't help, got two new belts here but the sliding door to that building is froze shut. Will check the numbers on a couple machines.

casecollectorsc · Jan 12, 2017

Sorry, three are unreadable and the fourth is missing and no parts book.

John Saeli · Jan 12, 2017

Thanks Darrell. Not listed in the parts books for some reason anyways. Can't figure it out.

Buddy K · Jan 12, 2017

From parts book for s/n 8164801 and after, for 8 1/4 dia. blower pulley, belt # 0662fh1 for 13" pulley, belt # 02096fh. I did not find size for belt.
Buddy

jon f mn · Jan 12, 2017

Weren't those belts laced so they came off a roll and were cut to size? That is how the drive belt for my 77 combine is done.

Greg Breisch · Jan 12, 2017

Had a guy in PA made me a new for my 212

Adirondack case guy · Jan 12, 2017

Jon, those belts were endless with a vulcanized joint.
Loren

John Saeli · Jan 13, 2017

Thanks for all the help. There they are, listed on page 23, but nothing of "Belts" in the table of contents.

1031D · Jan 13, 2017

Hey John! Same number until discontinued. I have a new one on my chopper and a brand new spare

Model 212 Chopper ???

John Saeli

Well-known Member

casecollectorsc

Well-known Member

casecollectorsc

Well-known Member

John Saeli

Well-known Member

Buddy K

Member

jon f mn

Well-known Member

Greg Breisch

Member

Adirondack case guy

Well-known Member

John Saeli

Well-known Member

1031D

Well-known Member

Similar threads