End of year/start of year project

CZ

Member
Finally had some free time between Christmas and New Years to get going on a long back burner-ed project with my 1943 S. The first photo is where I started
The second photo shows the standard drawbar carrier removed
Third photo shows the new carrier I fabricated ready to install
Fourth photo shows the new assemble and Eagle hitch installed. The black hitch is a standard 3-point model
Fifth photo shows the lift links in place.

The Eagle hitch parts mostly came from a scrapped out model D. Will post again when I get the lift arms installed
 
Read the fine print at the bottom of the post page about picture file size. I had trouble too and discovered I have to compress my pictures so they are small enough to post. I think also after you click "Upload", which should show a preview thumbnail of your pic, there is an additional button you need to click that is labeled "Continue". Use the test forum to practice.
 
If you are on clasic view and you went to bottom and clicked on Up Load Photo, went to your photo files and selected a pic and then hit the UPLOAD icon it takes up to several mins. up to 7 sometimes for me, to upload ,and once uploaded there will be a thumbnail pic and and CONTINUE icon above that, you have to hit, and then repeat for next picture. It can be very time consuming.
Loren
 

Thanks Gang, lets see if this works
a246532.jpg

a246533.jpg

a246534.jpg

a246535.jpg

a246536.jpg
 
Interesting. I am not too familiar with the EH DC and SC. Where will the rockshaft go at top if there is none cast into the top of the transmission?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top