kcservak

New User
How about just pics of your 580 ck backhoe if this is the wrong spot for this please move to the right one. And any restored or being restored would be really great thanks.
Keith.
 
first pic is my 71 580CK sold new as a skip-loader, with 3pt pto remote hyd and draw bar, I have the backhoe mounts for it and a backhoe, also have a MOD hitch for it,, it is also equipped with a 580B cab
a243794.jpg
 
Thanks case nutty I just picked up a 1969 580 ck backhoe that has sat for over 20 years after a valve job and a carb rebuild it came to life. It has a simmons cab I think. I will Post some pics as soon as I can figure out how to down load the from the phone that is smarter than me.
Keith.
 
a few more for you Keith,, first couple is the first 580CK we sold in 1967 to our cousin,, he ended up buying two 580CK from us for digging reserve pits here for drilling Uranium back in the 60's and early 70's, one shot shows the cab that was available for them,, not much for looks but sure was Nice in our harsh winters, a few shots from lit and then a couple of mine at work

cnt
a243818.jpg

a243819.jpg

a243820.jpg

a243821.jpg

a243822.jpg

a243823.jpg

a243824.jpg
 
Thanks again nutty do you know what cabs where on these machines when new? And I can't believe there are not more guys on here that don't want to show off there 580 ck's.
One more thing Nutty and I know you are the guy to ask could you tell me what fluid goes in my shuttle.
Thanks for you help and the great pics please keep them coming.
Keith.
 
I use CIH Hy-Tran in mine for hyd steering power shuttle and trans/rear end,, TCH was the original oil you can use any good hyd oil in the power shuttle and be fine
cnt
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top