model 70 and 75 loader. Determine which one and capacity?

fastline · Sep 22, 2016

I have an 1170 with a loader. I am trying to positively ID the loader and determine what it can really lift. I have 2600# to offload once. Just a piece of equipment.

I am not sure of the specs of a model 70 but I know my loader reaches WAY up there. I load round bales on semis 2 high no problem. The top of the vertical arms at the back of the loader are approx equal to the height of the steering wheel.

I know it is a Case loader. I just want to confirm which it is.

casecollectorsc · Sep 22, 2016

Sounds like you have a model 75 hi-lift loader. Should lift 2600# if your pump is good. Model 70 loader uprights would only be 1/2 way up on the hood.

John Saeli · Sep 22, 2016

A picture would cinch it, but definitely sounds like the 75. Great Loader. With the pins in the appropriate holes, she will reach 21' no problem. And, 2600# is also no problem, assuming no problems w/ the tractor hyd's. The 75 was built by Great Bend, but CASE actually spec'd a heavier Loader than what Great Bend was selling. Heavier Gussetts & heavier cyl's.

fastline · Sep 22, 2016

Thanks guys. I will try to snag a pic. A little busy building a road right now.

The loader seems very strong but, as maybe with all loaders of this type, it seems a little floppy up there. I am sort of use to more sturdy lifts like a backhoe or front loader.

Mine did have some cracks on the bottom side that I fixed a while back from its previous life. Apparently those loaders don't like pushing down. Or maybe someone just abused it.

model 70 and 75 loader. Determine which one and capacity?

fastline

Member

casecollectorsc

Well-known Member

John Saeli

Well-known Member

fastline

Member

Similar threads