Case 211b hydraulics

Travers

New User
Got a Case 211 B with the Eagle Hitch system.
Has the dual hydraulic levers. One for the 3 point hitch and one for the remote cylinder.

The one for the 3 point hitch doesn't seem to be working right. No matter which way I move it the hitch raises. If I ease it forward slowly the hitch lowers.....sometimes.
I did replace the filter for the hydraulic pump.
Does it need bled? If so how?
If not then any ideas what's wrong?

Thanks
 
Thoroughly check the mechanical linkage . Make sure all the pins are tight and moveing the valve correctly under the gas tank. the roll pins can come partially out there, and cause the problem you describe.
Loren
 
I have had those little roll pins shear off when there was a lot of pressure on the hydraulics, like with a bucket full of gravel or so. Then when there is no pressure, the lever "grabs" enough to rotate the valve.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top