Cold Start 930 Vid

Don L. · Aug 12, 2016

https://www.youtube.com/watch?v=OXPROMTZSBE
Cold Start 930

01gentdc · Aug 12, 2016

sunthim was not rite ,. fuel filters ,..once started she hit on all 6 evenly ,,.the temp could not had been lower than 50 degrees ,, our 930 will cold start easily without ether in 20 degree weather with manifold heater,. once she is firing on her own I switch back to heater, to keep her going until she evens up ,. that 1st 2 minutes or so our 930 is a real kackler,.and the motor is worn out

jacksun65 · Aug 12, 2016

I bet Lorens doesn't start that bad.

TGP · Aug 13, 2016

I agree. No fuel or something.

Ah youth.
Love how he just runs up to the operator platform.

I would have to squirt that air bonnet from the Seat!
By the time I crawled up there I would be DONE!
Tom

rfdmn · Aug 13, 2016

perfect example of how not to shoot ether. He must not of believe in cranking as you spray.

John Saeli · Aug 13, 2016

Really sickening. Poor batteries so he uses ether. Cracked heads are the result. Did you hear it knock? Left the throttle wide open, she revv'd up on a cold start. Not all his fault, poor teacher.

Bruce from Can. · Aug 13, 2016

He's just a boy with a toy . We never use either . And that isn't what it looks like here when we cold start a tractor, there are never any leaves on the trees when we have to "cold start ". Some one has filled this fellas head with some funny ideas. Warm as it seems to be in that video, why not just click on the manifold heater for a bit ? Save that either for some thing that can't live without it, like a IH B275.

oliver2150 · Aug 14, 2016

Thanks for posting. Really like them big Case tractors.

Brokengun · Aug 18, 2016

Can some one please explain the purpose of this video?

The belts on that tractor must loose as a goose. If someone knows that boy tell him to tighten the belts and maybe change fuel filters.

Cold Start 930 Vid

Don L.

Well-known Member

01gentdc

Well-known Member

jacksun65

Well-known Member

TGP

Member

rfdmn

Member

John Saeli

Well-known Member

Bruce from Can.

Well-known Member

oliver2150

New User

Brokengun

Member

Similar threads