(800) 853-2651
SHOP NOW

630 triple range noise

4

400ss

Member
So I fired up the 630 I'm working on and the front gear in the triple range seems to be bouncing around between the two gears and making an awful noise. So I started it without the top cover on to find out the problem and no noise. So I'm assuming one would just need to adjust the fork to hold it in the correct location? Have any of you guys had this problem before?
 
I have seen it in the 4 speed cover do the same thing,, I got the forks back to what they should be and no noise, seen this several times when people had broken shift forks and had them out of shape, triple would be the same issues
cnt
 
ok new problem the forks are none adjustable on the shafts and the shafts are none adjustable in the basket. The forks are set screws with drilled holes and the shafts are drilled for the detent balls. I'm really not sure what to do now the fork needs to go back it is letting the gear rest against the gear in the front. Any ideas??
 
yes they are all that way, you need to look over the forks well, I will bet at least one is bent and making the gears grind,, I use a big tight crescent wrench to bend them like a 16 inch one, I set the shift collars where they should be then measure line up with cover ect to see hat one is causing the issue

cnt
 
Had the same deal on a 530 triple range, one fork had a crack in it when engaged in low would let gear rub and sound really bad, found a another fork and took care of problem
 
I have only messed with the high low in the bigger tractors I didn't realize the baskets were all that way. Learn something new everyday! Thanks for the help guys
 
You must log in or register to reply here.

Similar threads

K
300 gear noise
Replies
4
Views
262
r.w.b.
R
S
830 Case transmission/clutch noise, possibly wrong oil?
Replies
4
Views
416
olgentdc
olgentdc
Hemmjo
worrysome 860 engine noise
Replies
11
Views
479
Jeff Hamilton
J
X
340 International Industrial PTO Problems
Replies
1
Views
193
Janicholson
Janicholson
C
Noisy transmission on a 100
Replies
2
Views
247
gene bender
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top