Goodies for the 831C

Adirondack case guy

Well-known Member
Went to the salvage yard and picked up a drawbar roller and a Hog Nose to bolt over the PTO for the 3pt top link and bolted on a pto shield that I had. Think I did pretty well on the roller and bracket. $50 bucks.
Loren
a232447.jpg
 
Around here, $50 barely buys a dirty look from the other side of the counter. Educate me on the hognose, please. Purpose, design intent, etc?
 
On the Racine large frame tractors, with eagle hitch, you had to bolt the hog nose over the PTO shaft to get the proper geometry for lifting 3pt implements. Included SC,DC, 400,7-800, and 7-830s
Loren
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top