no till drill Popham Auction

01gentdc

Well-known Member
speaking of drills, nephew james and I dropped in on Popham family , couple yrs ago, Mr Popham , lost his battle at 79 yrs young with melanoma that mastsized into leukemia . durn that disease seems to be everywhere !!. talked with his widow and son mike,they certainly are Wonderful good people in Rhodelia ky, ///Barrs auction website/// we went to view the motors and such look and for a double stage hoist cylinder for my f -600,./ lots of goodies,. a must for anyone in a radius of 75 miles ,they know some stuff will go for scrap price , and are Ok,.. but also hope that someone can use the stuff rather than trash such resources .. the no til drill ,is in top condition ,. I would bet was built and marketed by Case,,. but I dunno,. if you visit the website there are over 200 pix,,.. I got my eye and hi hopes for one of the parts VAC's ,.so you other guys need to yield ,,. LOL
 

Says No-Till Drill on the front box and looks like Case colors but not sure if it was made by Case or not.
I live west of Webster about 15 miles from Pophams place, nice folks.
 
maybe CNT Tom will know , if see this, and chime in if he looks at Barrs Auction website those big tall press wheels make me think Case ,. Mr Popham painted a lot of truks he owned in Case desert sunset and flambeau ,seems he could do anything he set his mind to,.
 
I found a Barrs in KY??? there is this drill? for sure Not a CASE made one,, a CIH maybe but not a CASE, there is also this KOOL Dodge truck on the same auction
cnt
a231757.jpg

a231758.jpg
 
Are you going to the auction? I see in the pictures there is a truck (cabover) setting in a shed that has been wrecked. I dont see it listed just wondering if it has a cummins in it? I need an engine for a project.
 
(quoted from post at 14:07:33 07/13/16) Are you going to the auction? I see in the pictures there is a truck (cabover) setting in a shed that has been wrecked. I dont see it listed just wondering if it has a cummins in it? I need an engine for a project.

Not 100% sure but I believe it's one of those little snub nose Mack's, he liked them old Dodge's and Mack's.

What size Cummins are you looking for, I got a 5.9 I'm going to be swapping out pretty soon, it's running but using oil so it'll need gown thru.
 

I found a conversation on here from early 2013. That machine is identified as a Moore uni drill, from Northern Ireland. Marketed by Gilmore Tatge.
 
yep , cnt , that's the one , , that big dodge has my nephew james all excited , he just wants to have some seat timed , LOL ck Richard ,,the mack has a twisted cab , I am going to the auction , you should too ,,.
 
(quoted from post at 18:06:09 07/13/16) looking for 5.9 I need a whole truck, engine, tranny and wiring.

Mine's just a complete engine with no wiring. I did a 5.9 conversion on my F-450 a few years ago when the 6.0 blew up. Bought a running engine from a salvage yard that wasn't as good as they said it was so I've done a complete rebuild on another 5.9 but haven't had time to swap them yet.
A local guy did have a non running 1st gen Dodge (inj pump leaking) and a 2nd gen but not sure what he wants for them. Or are you looking for some type of medium duty truck setup with the larger transmission.
 
there are a dozen or more complete Ford and Chysler /dodge 318 - 383?413 and trannys stashed in the shed ,no doubt at one time they were considered good, and therefore were niot left ouside with the other motors and transmissions , these motors will probably sell choice x however many a fella wanted to take a chance on andperhaps 20 drive shafts stashed above in the rafters .. and 2 detroits diesels
 
An old Case man will spot that this man was a Case man through and through, he painted his trucks Case colors, would be fun to be there. Thanks for posting
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top