Case 210B Rear wheel

Chickesntrip

New User
Need a little help figuring out what wheel to buy to replace these rears. What i have doesn't seem to match what every website says I should have...
 
(quoted from post at 17:59:52 06/02/16) Need a little help figuring out what wheel to buy to replace these rears. What i have doesn't seem to match what every website says I should have...

Sorry, having major issues getting pictures to post. i'm sure this will be ugly when it finally works.
 

It's a one piece wheel although everywhere i look states it should be 2 piece. I just found an online pic...

http://www.tractordata.com/farm-tractors/001/8/0/1804-ji-case-210-b-photos.html

Looks like the same wheel.
 
I needed one for my 310 that is the same measurements. I cut the center out of a wheel from an old 65 JD combine and welded the center from mu old rusted out wheel into it. Not bad pay for an hours work.
 


Wheel is case part # G12160 used on tractors before

ser # 6128060 . My guess is that it came from a backhoe.

george
 
I had a bad center on my 310 6 lug rim years ago. They weren't available then either. While at a tractor salvage yard in Connecticut I saw a 6 lug Farmall (A I think) so I bought both of them. I cut the rivets and they are perfect fit into my original rims which were in good shape. Still using them 22 years later.
 
(quoted from post at 19:41:34 06/02/16) I needed one for my 310 that is the same measurements. I cut the center out of a wheel from an old 65 JD combine and welded the center from mu old rusted out wheel into it. Not bad pay for an hours work.

I'm afraid my welding skills wouldn't hold up a go cart and the mess i could make in an hour would take weeks to fix :)
 
Have the old rim torched off and grind the rivets and other stuff off smooth then knock out the rivets, if the rimhas been rplaced once and welded on then you will have a bit more grinding to do before fitting a new rim. Mount the new rim on the tractor get the rim in the right location and turning true, tack weld and take to a good welder. Titian makes most of the rims that are available and many places can order them.
 
I have 2 wheels off a 210b if it would be of
any use to you. I haven't looked at them for
a while so not sure of condition. I made
adapters and put 8 hole wheels off a john
deere 45 combine on my 210b
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top