Adirondack case guy
Well-known Member
Been presure washing the 931 for the last two days getting it ready for paint. the greese and grime was really baked on afrer 47 years. I don't have a hot water pressure washer, so I depend on degreaser solvent to cut the nasties off the tractor.I have the platform and bat tray stripped off so I could get all the crud off the tranny and rear end.
Hope to remove the rear and front tires and wheels tomarrow before the rain sets in again. It is only supposed to get to mid 40s with rain Sunday, but I have lots of sheet metal to sand and get ready for paint. I can do that in the shop. I guess I'm going to remove the radiator again and do a better job of cleaning so the fan and shrouds look like they did when new. I no longer punch a time clock, and I'm getting slower and can't push myself, but I'm being pretty perticular on this tractor.
I'm not going to be as fussy on the 831C, but It does deserve a decent facelift. Planning to paint both chasis at the same time. I'm lazy and will only have to clean the paint gun once. HeHe
Loren
Hope to remove the rear and front tires and wheels tomarrow before the rain sets in again. It is only supposed to get to mid 40s with rain Sunday, but I have lots of sheet metal to sand and get ready for paint. I can do that in the shop. I guess I'm going to remove the radiator again and do a better job of cleaning so the fan and shrouds look like they did when new. I no longer punch a time clock, and I'm getting slower and can't push myself, but I'm being pretty perticular on this tractor.
I'm not going to be as fussy on the 831C, but It does deserve a decent facelift. Planning to paint both chasis at the same time. I'm lazy and will only have to clean the paint gun once. HeHe
Loren