jicase#1

jim_uny · Apr 3, 2016

i saw previous post on 1370 teardown w/ pics. very helpful. i am wondering how long it took to get to that point. also other than gantry are they any special tools required.

jicase#1 · Apr 3, 2016

it's not a bad job to do I had everything split and took apart in about a day working by myself it looks intimidating to do but if you have a way to prop up the platform,motor and a dolly to put under the rear end to roll out I would recommend widening the wheels out to make it easier to work on and unhook everything and maybe take off the 3 point arms to have it balance better because it wants to tip back a little with the extra weight on the back hope this helps

jicase#1

jim_uny

Member

jicase#1

Member

Similar threads