Will we got the vac out this morning and it ran good .... after awhile it just stop running .. wait a little bit and it started right up ... go a ways and it stop running ... wait and it started up ....
I did put a carb. kit in it ... Is seem to me it is running out of gas ... Can someone explain to me about where should the power screw should be { at least That would be a start } there is only 2 screws to adjust ?? Right
I clean the air breather and when the breather was off , I put my hand over the carb. intake it was good ... { it is on now }
So i'm thinking it has to be Carb. adjustments ..... What do you think my problem might be ????
Any advice will be greatly appreciated .... mark