Need a Part for a 1968 430

Hi Everyone -

Looking for the leveling mechanism for the 3pt hitch on a 1968 Case 430. It is not an eagle hitch. Mine has the handle broken off and I cannot see a good way to repair it. I have called several salvage yards with no luck. Anyone have something like this?

Have a great evening.
Rob
 
Jean Claude Marleau who is a former Case dealer and posts here has a lot of good used parts. He may be able to help you out. You may be able to find his contact info in the archives. Don
 
i was looking for one last spring and i couldnt find one anywhere. i took a square solid shaft and a picture of one and with a hand grinder i made one. it turned out pretty good.
 
Posting a few photos in case someone might have one of these for sale. Handle is broken off. I dont see a good way to repair, so I am looking for a replacement.
 
Look for one from a Racine tractor they will bolt right on. You might need to add more threads to get it short enough. These were cover in a post about 4 pages back called factory or fabricated.]
 
Trying the pics again. Rookie mistakes I guess..
a211896.jpg

a211897.jpg

a211898.jpg
 
Hi Barry, thanks for that information. I found the post that you were referring to. Looks like that is something that would work for me. Any suggestions on where I can find one for sale?
Thanks for the help!
 
You have a draft o matic 3 point, that is a newer generation of hitch than I was thinking about. I don't know much about them other than to wish for one.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top