Decal Dimensions

Joe Young · Sep 27, 2015

I have an eagle hitch Danuser blade that is stripped, primed and ready to paint. Could someone measure (and maybe take a picture) their CASE decals on each side of the main assembly? Mine were too far gone to see.

Also, I can't seem to locate a quality color, original sales/promotional picture of the back side of the blade. The framing on the back side appears to be flambeau red, but I've seen a couple of assemblies where the "extended" frame for the 8' blade is painted another color (maybe black??). I think the actual blade was originally painted black. Is that correct?

Thank you in advance for any help. - Joe

BarryfromIA · Sep 27, 2015

Go back to Casenutty's post on grader blades. He has at least one of nearly every CASE blade.

chuck machinist · Sep 27, 2015

Go back to Casenutty's post on grader blades. He has at least one of nearly every CASE blade.[/quote] Here are the pics.This will get you started! Good luck. I got a little envy going here! CHUCK

Joe Young · Sep 27, 2015

Thanks guys. What I'm trying to discern is the color of part number 43. I know the other frame pieces on the back of the blade are Flambeau, but what little paint was on the extension piece for the ft blade (part number 43) on mine was not Flambeau. It appears as though it might have been black like the blade itself???? I thought I recalled seeing something like that in a picture of another blade as well??

I know where to place the decals but I'm trying to get a dimension of the decal so I can be specific when I call Maple-Hunter.

Danuser%20Blade%20Parts%20Diagram_zpsmrqcsqzc.jpg

Case Nutty 1660 · Sep 28, 2015

Joe, seen this too late but will get you new pics and size measurements in the morning, I will take close ups of all the decals I have on mine

Case Nutty 1660 · Sep 28, 2015

and I do think the blade and the support are Black

Case Nutty 1660 · Sep 29, 2015

Joe if you want these pics e-mailed contact me @ [email protected], If you need more shots let me know,, CASE is 7" long forgot to get a height,,, DANUSER decal on my side plates are 8" long, main frame blade support is Flambeau, the extra one for 8' blades and the moboards are Black
cnt

Case Nutty 1660 · Sep 29, 2015

forgot one I can get the height for the decals as well, I also have ops and parts list for these as well

Joe Young · Sep 29, 2015

(quoted from post at 12:25:39 09/29/15) Joe if you want these pics e-mailed contact me @ [email protected], If you need more shots let me know,, CASE is 7" long forgot to get a height,,, DANUSER decal on my side plates are 8" long, main frame blade support is Flambeau, the extra one for 8' blades and the moboards are Black
cnt

Tom, Thank you! That is exactly what I need, I thought that lower bracket was something other than Flambeau Red, and your pic confirms it was black.

I learned something else. I assumed the decals on the frame of these blades were all Desert Sunset letters, mostly because those are the only decals that have been visible on the blades I've seen personally. What your pictures show are the older blades had the black letter decals that were used in the last 50's. That is what my blade needs.

Thank you. Your help is always greatly appreciated. We are fortunate to have such a great resource!!

Decal Dimensions

Joe Young

Member

BarryfromIA

Well-known Member

chuck machinist

Well-known Member

Joe Young

Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

Joe Young

Member

Similar threads