After making special brackets to adapt my 3pt snowblower to my 830, Im discovering some unusual mechanics of the raising & lowering. I understand the arms of the eagle hitch are 3-4 inches shorter than most 3pt arms & the center link seems it's located higher as well. I've got the snowblower to rest on the ground ok but when I raise it there seems to be more pivoting motion than what I've seen & the arms have to be completely raised only to get the blower only about 5 inches off the ground. I've adjusted the center link, which helps, but something isn't right. Do I have to shorten the center link some to match the length of the arms or is the design of the 3pt positions the issue? This will be the first winter I've used a Case 830 on a snowblower...hope she has the power. lol. Anyhow, I hope to hear your replies.