2390 engine stalling. Pilot spools/clutch?

AFL · May 28, 2015

My 2390 started acting up today. Pressing the clutch down causes the engine to instantly stall. We did a few tests to the tractor and here's what we came up with:

Powershift in 1, clutch out: engine runs but is under a heavy load

Powershift in 1, clutch halfway down: engine runs normally

Powershift in 1, clutch down: engine instantly stalls

Powershift in R, clutch in any postion: engine instantly stalls

Any ideas of where to start looking here? Thanks in advance, everyone.

Jeremy McNary · May 28, 2015

Sounds like the pilot spools are stuck, take the valve off take it apart and get the spools freed up before you have to do a whole powershift.

1370rod · May 28, 2015

Sounds like the C-3 pilot spool is stuck, but as Jeremy said I would check them all and install new hyd filters for sure. Rod.

AFL · Jun 2, 2015

It was the C3 pilot spool. Thanks for the help guys.

2390 engine stalling. Pilot spools/clutch?

AFL

Member

Jeremy McNary

Member

1370rod

Well-known Member

AFL

Member

Similar threads