VAC and rear Carrier Pictures

connor9988

Well-known Member
Location
Central Iowa
Its a tight fit since I fixed the EH arms but it still works good. There are some thin spots in the paint on the carrier paint but overall I think its okay for an implement.
I'm still trying to decide whether or not to add decals to it. As you can see it will lift a 4x4 ATV but just barely.
Would it be possible to "turn it up" 50 more Lbs?

Also, my brother and I came across a fawn in a grassy field and got video of it. Ill post if for everyone.
We left it alone after it took off down the lane a short ways.

<iframe width="560" height="315" src="https://www.youtube.com/embed/lNtiHvEN5JU" frameborder="0" allowfullscreen></iframe>
a191969.jpg

a191970.jpg

a191971.jpg
 

Do you know what the pump pressure is now? I had a VAC-14 that wouldn't even raise the lift arms. The pump was shot. After I replaced it everything was fine.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top