Plowing with the VAC (Pics Video)

connor9988

Well-known Member
Location
Central Iowa
Got the VAC and E21 plow out this afternoon to try and set it up to plow right. It was nice and warm and fun to do.
I need to replace many of the bolts, sandblast it, and paint it.

<iframe width="560" height="315" src="https://www.youtube.com/embed/TPOau39fIWc" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="https://www.youtube.com/embed/YkC-sSwcx2o" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="https://www.youtube.com/embed/smIUtDR1J_k" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="https://www.youtube.com/embed/sK0BFJV45_M" frameborder="0" allowfullscreen></iframe>
a189788.jpg

a189789.jpg
 
good job plowing,

question: what piece of equipment did you run over that field of corn stalks with? it appeared to chop them up fine.

I try to chop stalks up with my rotary cutter or try to disk them in, but with my small equipment, 6 ft disk, all it does is knock them down and roll over them,

the cutter chops them up some, but layers them in between the rows

so when I start plowing, the plows clog up with corn stalks, making for a less than comfortable experience.
 
(quoted from post at 01:36:53 04/24/15) Got the VAC and E21 plow out this afternoon to try and set it up to plow right. It was nice and warm and fun to do.
I need to replace many of the bolts, sandblast it, and paint it.





Nice videos thanks for posting it. Nice tractor as well
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top