830 dash finished

111

Member
Just need to call John and Chris now and order another temp gauge for the converter and a case oil press gauge rather than just the auto parts
store gauges I temporarily put in the holes. I also added the comfort king handles from a 930 and put on some 830 comfort king steps so I can
get up from the front, rather than climb over the eagle hitch. Someday I will get to work on the rest of the tractor, she's just going to get used for
pulling at the tractor shows.
Ben
a188740.jpg

a188742.jpg
 
Looks great, I bet there's aircraft flying around that don't have that many gauges. But seriously that is very nice, Rod.
 
Thanks for all the nice comments, I've been wanting to try this for a couple of years now, it was a lot easier than I thought it would be. If this was a tractor that was all original and going to be restored I would send the cluster out to be redone, I really like the looks of a nice restored cluster, but this tractors dash was getting bad and most gauges didn't work. Plus I wanted to ad a few more. Do you guys know who is restoring these clusters now? I know Roger Hornbaker isn't anymore, I wish he was, I bought quite a few parts for my 300 from him, he did great work. I would like to have the cluster redone that came from the 830 and possibly the one from my 930.
Ben
 
yes that is quite a few gauges , I suppose this is c-o-m, tranny ? rite 111?? for our sake ,can you identify each for their function ? ,,
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top