A couple of guys have asked me about this so I thought I'll just re-post it after 11 years. We built about 5 of these in Cambodia in 2004. They used a Mitsubishi truck engine and a Korean Army truck front end. We figure they had about 90hp and they worked pretty well in the Cambodian mud. There were some problems with U joints holding up and as far as I know most of them are now retired to the Cambodian Hedge rows. They were a full time 4X4 in all gears and drove off the cross shaft through a drop box. Getting the ratios right with the sprockets and gear boxes stretched our math ability,
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18951.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18952.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18953.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18951.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18952.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto18953.jpg"/>