Help with 310 clutch fork

Jeff B. · Apr 8, 2015

A guy named Truckdog posted a question in tractor talk.
He's looking for some info/photos of the clutch release fork/pivot and the other bolt that goes through it. Does anyone know what the extra bolt out toward the end of the fork does?
I believe he has the G148 gas single plate setup. Case parts website doesn't cut it. I was hoping someone had a photo or two.
Thanks,
Jeff B.

Joe (Wa) · Apr 8, 2015

Pic is 310 single plate clutch. The extra bolt is just a stabilizer. It keeps the yoke part of the fort from riding on the hydraulic pump drive shaft.

Joe

Joe (Wa) · Apr 8, 2015

Been a long day, I should have wrote that the stabilizer bolt keeps the yoke part of the fork from riding on the release bearing spring that is rotating with the hydraulic pump drive shaft. The bolt is 3/8" x 2-1/2" with a nut and lock washer. I would use a grade 5 or 8 bolt.

Joe

Jeff B. · Apr 9, 2015

Thanks Joe. I knew I had seen that photo before. It's exactly what he needs.
The folks on this forum are the best !!

Help with 310 clutch fork

Jeff B.

Member

Joe (Wa)

Well-known Member

Joe (Wa)

Well-known Member

Jeff B.

Member

Similar threads