Re: More progress on the 440 and snow plow.

Adirondack case guy

Well-known Member
I think you are asking me about my snow plow on my 440. This plow and frame was made by Myers plow company, This one dates back to the 50s. Back then they offered universal tractor mtg kits. The kit was composed of angle iron and plates and someone had to weld them together to fit specific brands and models of tractors.
Find yourself a used plow off a PU and buy some angle iron and build a frame that is braced back to the mid or rear of the tractor, and reconstruct the truck mtg frame so that it drops down far enough on the front of the tractor to make the plow set level. Then plumb up the Hyds.
Loren
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top