What oil to put in my case's loader backhoe

roger8244

Member
I need to change the hydraulic oil in the loader and backhoe that is on my case round nose. the loader and backhoe are connected together using the same pump and oil reservoir, I know there was a little water in the reservoir last fall but didn't change it (forgot to) now the hydraulics are not working and I am sure its froze up so when it warms up here in the cold as hell upstate New York area I am going to change the oil in the hydraulics and I need to know what oil I could use?

could I use a.......All Season Hydraulic Oil ISO 46 ( SAE 20 Equivalent) or Renew for older tractors- Universal Trans/Hydraulic fluid, both are available at Tractor supply

The backhoe is a pippin 120 and I think the loader might be a case(the tag is gone), I am attaching photos in case someone knows what make loader is




mvphoto17349.jpg
 
The loader is NOT Case., so probably Pippin also.
Either of the oils you mentioned will be fine in that tractor. You could spend far more for Case branded oil that may soften and extent the life of some leaky seals. the choice is yours.
Loren
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top