AKSeat 3

Straw Boss · Jan 11, 2015

There are two little bearings and four bushing sets.
Anyone know if these are available from Case, Saeli or Don L.?
On many of these seats, the bearings and bushings aren't to bad, but the bolt hole in the frame is slopped out. I wonder if the bolt hole was slightly bigger than the bolt when new because they should never have been loose enough to wear on the bolt, yet they all did.

Brendon Warren · Jan 11, 2015

I cleaned the holes up and bought new bushings from my local hardware store.

Dave F · Jan 11, 2015

If you can get measurements from the old parts, you might try McMaster Carr online or another industrial supply house for bushings and bearings. I rebuilt the pivots in my 2590 for $15 and a little time compared to the arm and leg CaseIH parts wanted.

The oil shock in your other photo may have resistance in one or both directions, depending on design. Generally collapse easier and take more force to extend. If CaseIH doesn't carry them, you might try snowmobile parts like DennisKirk for a ski or suspension shock that could be made to fit.

AKSeat 3

Straw Boss

Well-known Member

Brendon Warren

Well-known Member

Dave F

Member

Similar threads