frozen precip.

chuck machinist · Dec 28, 2014

Tom

How much frozen H20 did you get for xmas?

tomturkey · Dec 28, 2014

None here in central Iowa, Christmas Day was partly sunny and in the forties. The creeks/cricks are still running no ice on the lakes or ponds. We had two weeks of December cold in November, so we were "owed" a few weeks of moderate temps. Sounds like winter hits this week with lows in single digits and highs in the twenties. tom aka gobble

McKerrow630 · Dec 28, 2014

Chuck, here in west mi. we had mud for christmas. There talk'en least amount on record for the month dec.(snow) temps are to get back ta normal next week......which means "lake effect" ask me at the end of febuary.Put over 200 hrs. in the seat of ah 8ft. snowblower last winter for the farmer I work for. Hope that don't happen again. God Bless

Case Nutty 1660 · Dec 28, 2014

we got 3" or so here on Christmas day we are going into the deep freeze for a bit it sounds like -11 for at least one night. I got the VA out yesterday and cleaned off what we had, got to 20 above yesterday
cnt

Lazy WP · Dec 28, 2014

We must have gotten everyones snow. I bet we have close to a foot, in the yard.

chuck machinist · Dec 28, 2014

To TOM!

I hope that the wx you are receiving now will help serve your crops in the upcoming spring. Oh by the way, I will endeavor to be a little more specific which Tom I raised the question to.HEE

tomturkey · Dec 28, 2014

Chuck; How many Tom's do you think hang out on this board???? I did not think you were speaking to me but.....I thought I would give the weather report just so you would know-I pay attention to your posts. BTW, 45-55 degress in the shop. Nice to have a heated space to work on stuff. Unfortunately neither of the two vehicles in the shop are tractors, at this time. Blessings TOM

chuck machinist · Dec 29, 2014

Tom T.

Glad to see the shop was finished in time for the heater switch job. What kind of shelter did you have before that?

tomturkey · Dec 29, 2014

Did not work on anything thru the winter as the tools and the tractor metal would be the same temp or colder than air temp. My fingers would get cold with in 15 20 min. Just was'nt worth the pain or slow going. So did not work on much when it was cold.tomturkey

chuck machinist · Dec 29, 2014

Tom Nutty,

I never get tired of seeing that VA with the blade on it!

chuck machinist · Dec 29, 2014

Tom,

Mud has never been my friend, I always slip and fall/ Only one time in my youth did I enjoy mud. I pulled a John Deere out of the sand box with my DC -4 HEE!

frozen precip.

chuck machinist

Well-known Member

tomturkey

Well-known Member

McKerrow630

Member

Case Nutty 1660

Well-known Member

Lazy WP

Well-known Member

chuck machinist

Well-known Member

tomturkey

Well-known Member

chuck machinist

Well-known Member

tomturkey

Well-known Member

chuck machinist

Well-known Member

chuck machinist

Well-known Member

Similar threads