Follow up with E-21 Plow

connor9988

Well-known Member
Location
Central Iowa
Made the new pins and put them in. The nuts pushed the pins over to I had to loosen the clamps on the square tube and adjust them but now it fits great and I can use standard 3 point as well as EH tractors on it.
a175929.jpg

a175930.jpg

a175931.jpg
 
I couldn't find any coarse threaded pins so I just used some
bolts. Actually they are threaded rods leftover from an
International Harvester mounted cultivator that was scrapped
years ago.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top