1370 injector not working right

BryanG · Nov 26, 2014

Just replaced a injector today on one that seemed to just dump the fuel in. Put it in today an looks the same wet where the exhaust comes out, swapped it with the one next to it that was working right an the same one did it to that one, so that injector must be bad. But what gets me is they all were dry except one before an that one turned out to be a cracked sleeve, I replaced that an tried it, the one I replaced is dry but now it seams that three more of my cylinders are wet, one i know for sure is the injector but how does this happen when just sitting? Could their be a pice of crap that got in the line an got in the injectors?

G1355 · Nov 26, 2014

Does it just get wet on the outside with fuel until warmed up, my g1355 does that when its cold out when you first start it but when it gets warmed up it goes away, if its above 50 degrees it won't do it, had multiple dealers tell me that's how the 585 motor is dont know if the case is the same or not, if its cold out could be problem if its never done it before you might have different problems and injector could be junk as you said.

cs.hess · Nov 26, 2014

Check compression on wet cylinder.Low compression may be culprit rather than injectorsChanging injectors seems good way to mess up good ones with dirt.

1370 injector not working right

BryanG

Member

G1355

Well-known Member

cs.hess

Member

Similar threads