SC one more pic

fixerupper

Well-known Member
Got her on the auger loading trucks. Makes her work a bit. 10" auger. I won't bore you with any more pics. Just had to add this one. The high PTO location on the Case makes it a little better tractor for this job.
mvphoto13347.jpg
 
That is a really nice looking SC!

If you need a high PTO you should get a Massey
Harris 44. Dad hated the one grandpa had.
 
I put my SC on my 10 inch 71 foot auger just for fun one day
this fall. Couldn't go full capacity but was doing pretty good -
really cackling. Until she decided to blow all the coolant out
of the radiator. It seems a mouse family moved in while we
had the radiator hose off earlier. I thought I smelled mouse
when I was adding coolant but didn't think much of it. Should
have stopped and checked it out then. Now I have to clean
that mess out. Oh well. If I didn't have this I'd have to find
something else to do for fun.
 
I see you moved the tool box up above the belt pulley. I always liked that location better than under the seat. Good looking SC
 

Tool box is much handier there. A long 10 inch auger would definitely blow the carbon out LOL. Inside the RH fender I have a (farmerized) coffee can bolted to the fender just to hold a water jug or whatever. Drilled four holes in the bottom of the can so it will drain in the rain. I made a full width steel platform for the back that's right above the drawbar. Makes a tractor that's already easy to get on and off of even easier. Drawback is being steel it's a sounding board for any drawbar sounds. Those new rear tires were $$$$$ last summer but I haven't spent hardly any money on the faithful old servant for many years so I went ahead and did it. Well, I had to, the cracks in the old ones pinched the tube.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top