VAC-13 E Series plow (Pictures Video)

connor9988

Well-known Member
Location
Central Iowa
Got the VAC and E plow out today and thought everyone might like to see. Also some good weather pictures. Thanks for looking.

<iframe width="420" height="315" src="//www.youtube.com/embed/3w392GxyIZs" frameborder="0" allowfullscreen></iframe>
a171271.jpg

a171272.jpg

a171273.jpg

a171274.jpg

a171275.jpg

a171276.jpg

a171277.jpg

a171278.jpg

a171279.jpg

a171280.jpg

a171281.jpg

a171282.jpg

a171283.jpg

a171284.jpg
 
Looks good! Here's the one I rebuilt two years ago. Plowed about half an acre with it breaking dad's garden.
2013-09-19_11-32-38_749_zps66308fac.jpg
 
Some more video and a few pictures of our Eagle Hitch Sub-soiler.

<iframe width="420" height="315" src="//www.youtube.com/embed/ZG3W6w2w0KM" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="//www.youtube.com/embed/WjK8PraUFY4" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="//www.youtube.com/embed/Hxy2i0jZTQY" frameborder="0" allowfullscreen></iframe>

<iframe width="420" height="315" src="//www.youtube.com/embed/_y44beBcdLE" frameborder="0" allowfullscreen></iframe>
a171307.jpg

a171308.jpg
 
That is a great rebuild on your plow. I see yours
has the tail wheel scraper as well as throw away
shares. I did not know they were offered with
throw away shares.
 
Very nice looking VAC you have. Here are three of my plows, I have never plowed the trip plow but have plowed with the other 2
a171328.jpg

a171329.jpg
 
Joe, we're you in my shed again? I have all 3 of those also, and that disk plow is my favorite.
 
Wow, did you adapt EX wear parts to the existing moldboards? Also, were the original bottoms BX, CX, or FS? I would think that complete EX-bottoms would bolt directly to the beams.
 
Boy those pictures and videos take me back a few years. My dad had a VAC and plows just like that. Did a lot of plowing back in the mid '60s, in my mid teen years. I don't think we ever got ours to plow that nice though. That darn trip was forever letting loose no matter how tight we tightened that spring. :( I remember my dad even wiring it down a few times so it wouldn't trip :oops:. Surprised we didn't bust a point or worse :lol: Going down memory lane can be fun.
LaVern :)
 
hey guys new to forum! I just inherited an old VAC from my dad. Need a few parts to get it running again, about a year sincw it ran. Dad passed and mom gave it to me. I clipped a many pastures with it around home. Can you tell me what year model it is from the serial number? 6012864. need to know year model for parts. thanks.
 
(quoted from post at 16:52:24 10/12/14) Wow, did you adapt EX wear parts to the existing moldboards? Also, were the original bottoms BX, CX, or FS? I would think that complete EX-bottoms would bolt directly to the beams.

Originally it had CX 14 bottoms but parts are getting harder to find and I had some new EX14 bottoms here. CASE made frogs that bolted to the old CX style plows that accept EX bottoms. I have tons of them and I use them on my plows because you can get EX16 parts pretty easy.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top