went to thrashing show

jon f mn

Well-known Member
Had time so I went up to the White Pine sawing and thrashing show about 40 miles from my house. Case was the feature and they had a good bunch for a small show. Some interesting stuff there. Never seen an idler like on the 200 before, must be to keep the belt off the axle?
a167495.jpg

a167496.jpg

a167497.jpg

a167498.jpg

a167499.jpg

a167500.jpg

a167501.jpg

a167502.jpg

a167503.jpg

a167504.jpg

a167505.jpg

a167506.jpg

a167507.jpg

a167508.jpg

a167509.jpg

a167510.jpg

a167511.jpg

a167512.jpg

a167513.jpg

a167514.jpg

a167515.jpg
 
Jon I've an idler like that on my SC. It's a wide front and was used to grind feed on a fixed hammer mill in the grainery...........
 
Thanks Jon for posting the pictures-never think to take pictures myself. For the rest of you out there my brother and I brought 12 tractors up there-all still working tractors, no restoration. My cousin brought rwo, the restored L and the 300 orchard. My brother brought a 211B, 311B, 500B, 530, 630, and 730 CK. He has two others at home, a unrestored L and a 970. I brought a 300 round nose, 430 diesel, 630 utility/standard, 830CK Case-O-Matic, 930CK, and a 1030CK Wheatland with optional PTO and 3-point. Good time was had by all. We drove most of them up there as it was less than 20 miles away for us. Thanks again Jon for the pictures and it was good to meet you.
 
Where are you located? If it is a factory original, I would like to take some measurements to make one for my SC with AWF (my email is open). Also, I am sure that others here would like to see some pictures.
 
Great pictures. That winch set up is really something! Love seeing different things.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top