Industrial 530 Case Tractors

Zach81 · Aug 28, 2014

I know this has been brought up before, but this is a little different scenario. Will a (non CK) 530 tractor with a model 31 loader and eagle hitch be able to accept a model 32 backhoe attachment. Would the rock shaft and such be in the way? I know the arms would come off. Also I know if it were a 31 to 31 and 32 to 32 there would be no issues, but the 32 seems only to have been for the CKs. If anyone knows such answers I would like to know. There is a older 530 industrial (non CK) and a seperate 32 hoe located elsewhere and would like to know if they could be married together. Thanks ahead!!

Case Nutty 1660 · Aug 28, 2014

you will need the backhoe mounts and the hyd lines for the backhoe, as for the 3pt yes the arms have to come off, the PTO, if equipped may be really close as well, they did have a special set of backhoes mounts for units with 3pt and PTO but these are hard to find
cnt

Zach81 · Aug 28, 2014

(quoted from post at 15:14:02 08/28/14) you will need the backhoe mounts and the hyd lines for the backhoe, as for the 3pt yes the arms have to come off, the PTO, if equipped may be really close as well, they did have a special set of backhoes mounts for units with 3pt and PTO but these are hard to find
cnt

Ok, but will the mounting pieces for the 32 hoe mount to the subframe of the 31 loader without any huge modifications?

Case Nutty 1660 · Aug 29, 2014

depends on what year they are and what they came from

Industrial 530 Case Tractors

Zach81

Member

Case Nutty 1660

Well-known Member

Zach81

Member

Case Nutty 1660

Well-known Member

Similar threads