(800) 853-2651
SHOP NOW

Case O Matic Comfort King Questions

M

Magoon13

New User
On the 830 commfort king should the tractor move when shifted into gear before throttling up?
Also, after a little work the gear shifter seems stuck in gear, is this a commmon issue? Any suggestions on how to free it?
As I am new to this tractor and Grandpa is no longer around, could someone give mme a copy of the page of the manual showing what each of the control levers & knobs are for?
Where will the filter & drain be for the case o matic. I am quite sure this has not been changed in the 40 plus years Grandpa had this tractor.
Any advice or help y'all can provide on this tractor will be appreciated. I hope to see this back working this farm again soon.

Broc
 
My 830 won't move until its throttled up, and it
too tries to hang up in gear a whole lot worse then
my 800 COM. Best I can tell you is pull it straight
out of gear, not sideways or you will hang it
between gears and have to take the shifter out. Had
to do that 3 times before I learned to take my time
and do it correctly.
The COM filter is on the right side, as you are
sitting on it. I think there are 3 bolts in the
cover. Plug, I don't know.
 
An owners manual would be a great thing for you (look on E-
Bay)and if you have any more questions a service manual would be
very helpful.Even the I&T service manual will answer your questions
on case-o-matic issues. Make sure and use GOOD quality oil in
COM.
 
You said to take the shifter out to free
It up. Now what is the trick to get it back in? Also, do I need to do anything to free up the gears first or should remmoving & re installing it fix it.
I really need to get this running again as the 444 international won't handle the disk.
Lastly, when I get this running again the case o matic oil should be checked with the tractor running at Idle right?
Thank you for the aSsistance. I know I need to buy some manuals, but when that is the answer to all my questions it isn't very helpful. I truly appreciate the advice & assistance.
Broc
 
You must log in or register to reply here.

Similar threads

L
Case 830 COM Comfort King
Replies
6
Views
582
munson1086
M
chuck machinist
Possible migration of 90 wt from rearend in my 611-B to Case-O-Matic torque tube
Replies
9
Views
403
chuck machinist
chuck machinist
1
931 comfort king draftomatic low hydraulic pressure
Replies
11
Views
435
Bill in Colo
B
L
1964 930 case comfort king brakes
Replies
3
Views
353
jon f mn
jon f mn
R
Case o Matic
Replies
11
Views
603
olgentdc
olgentdc
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top